15.06.15

Magico Adds New S7 Floor-standing Speaker to S-Series

Magico-S7

Magico has announced a new addition to its S-Series line of loudspeakers – the S7. A full range, 3-way design, floor standing loudspeaker...

Magico has announced a new addition to its S-Series line of loudspeakers – the S7. A full range, 3-way design, floor standing loudspeaker, the S7 incorporates new tweeter, midrange and bass driver designs that are derived from engineering found in the M- Project loudspeaker.
Towering over other S-Series models, the acoustic suspension enclosure of the S7 features curved aluminum side panels that are machined in-house from half-inch thick aluminum extrusions which are 16 inches in diameter. Internal bracing is carefully positioned throughout the enclosure to minimise resonances and create an ideal operating environment. Magico S7 The S7 houses three new 10-inch bass drivers that have powerful magnets and ultra-stiff aluminum cones which are capable of producing deep powerful bass frequencies with speed and accuracy. The excursion rate of the voice coil is measured at 15-mm linear movement and produces clean and undistorted sound pressure levels up to 120dB @ 50Hz / 1-meter.
The midrange driver (6-inch) in the S7 brings a new benchmark of measured performance to Magico. The cone material is formulated using Arkema Multi-Wall carbon nanotube and XG Sciences C-750 Nanographene which combined is 20% lighter and 300% stiffer than previous cone material designs. The underhung neodymium base motor system uses two extra-large magnets which provide an ultra-stabilised magnetic field for the pure titanium voice coil to operate within. The driver operates in a purpose built sub-enclosure made of a proprietary polymer material that was first introduced in the S3. The S7 incorporates a new (1-inch) tweeter that features a diamond-coated beryllium  diaphragm with optimized geometry, created using state-of-the-art Finite Element analysis modeling tools. This purpose built tweeter has extra-long excursion movement and uses a neodymium based motor system that is customised to match the sensitivity and power handling capabilities of the S7 while maintaining ultra-wide dispersion characteristics and ultra-low distortion measurements. All five drivers in the S7 are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that includes state-of-the-art components from Mundorf of Germany.

 www.magico.net