13.05.14

USD Offers Teletask Temperature Sensor for Floor and Outside Use

AUTHOR: HiddenWires

The new Teletask TDS12251 temperature sensor is suitable for measure and control applications under the floor and outside temperature sen...

The new Teletask TDS12251 temperature sensor is suitable for measure and control applications under the floor and outside temperature sensing. If you want to measure the temperature in underfloor heating or cooling, this sensor is what you need! 
This way you can adjust the room temperature just the way as done with (air) room temperature measurement. The visualization is for example possible on the AURUS touch panels with display. Furthermore, the Teletask system creates a history, dating back up to two years. The user can check upon historical graphs on his AURUS-TFT or GUI+ screens. Housing + cable + sensor: The set exists out of a compact electronic casing with a connectable temperature sensor with 1.5 meter cable (to be cut off at the desirable length). The sensor is sealed watertight and can be used inside as well as outside. The temperature range is from -40 °C till +80°C. 
Mounting: The casing can be installed in a standard wall box with cover plate, while the sensor cable goes 0.5 to 1 meter out of the wall through a standard (18mm) tube. Preferably in the center between the tubes of the floor heating/cooling. As an outside sensor he can be mounted through an opening in the outside wall or places in a wall box (not included) on the outside wall. 
Available from July 2014 in the UK from USD. www.usd.uk.com