WyreStorm Announces EX-SDI-50 Single Cable HDMI Over SDI Cascading Point-to-Point Extender Set
COMING AUGUST 2014!
WyreStorm EX-SDI-50 single cable HDMI over SDI cascading point-to-point extender set capable of transmitting lossl...
COMING AUGUST 2014!
WyreStorm EX-SDI-50 single cable HDMI over SDI cascading point-to-point extender set capable of transmitting lossless 1080p HD video@60Hz and multi-channel HD audio up to 50m (164ft) using copper-core 75Ohm WF100 coax cable.
Comprising of a transmitter and receiver, the EX-SDI-50 features full 3D compatibility, 24bit True Color, embedded EDID to manage the EDID handshake between devices to aid communication, and includes wide-band, two-way control from either source or display location via IR and RS232 with full support for leading third party control systems.
Featuring twin synchronous SDI outputs on the EX-SDI-50 transmitter, a signal can be sent in two different directions to create a cascadable splitting system feeding different locations by pairing a single transmitter with multiple receivers, with a SDI loop out on each receiver enabling the daisy-chaining of several receivers to create larger, multi-location distributions. (additional RX-SDI-50 receivers sold separately)
The EX-SDI-50 is designed for residential or ProAV applications where use of coax to distribute and control HD signals is either required due to retrofit installations where existing coax cabling infrastructure must be used, or preferred for its low loss at high frequencies; vital for cable/satellite television, cable modem installations as well as commercial applications such as security/surveillance, broadcast television and film production in studio or location, video conferences, electronic teaching, in fact, any and wired network area where the extension and amplification of SDI transmission is needed.
EX-SDI-50 HD over SDI Extender Set - see www.wyrestorm.com/catalog/50m-sdi-cascading-2w-ir-rs232
RX-SDI-50 HD over SDI Display Receiver - see www.wyrestorm.com/catalog/50m-164ft-hdmi-sdi-2w-ir-rs232-receiver