News

Keene Electronics introduces the 'IR Commander Matrix' IR Distribution System (15/10/2009)

The new IR Commander Matrix is the most powerful and advanced IR Distribution System Keene Electronics have ever produced!

The IR Commander Matrix can receive IR commands from multiple external IR receivers or via an IP network and route the signals to one or many IR emitters via its multiple, routed IR outputs.

• Full Matrix Signal Routing - Each IR input can be routed to any combination of IR outputs. This means for example an equipment cabinet could house say three identical Sky receivers, and each one can be controlled independently from different rooms, or if preferred, always from the same remote whichever room it is in.

• Four IR output channels - each IR output channel can drive IR emitter wands or slave IR distribution amplifiers.

• Six local IR input channels - Four IR receivers, one onboard IR receiver and one wand input for taking the output directly from another IR distribution system or video sender.

• IP addressable - Will accept IR over IP inputs from Keene IR Anywhere modules or from PC’s or handheld devices, up to 253 different IP addresses.

• Internal IR command store - Can store up to 128 IR codes in local memory, these can then be triggered by IP command from local network or internet.

• Network inputs can be routed based on IP address -Maximum flexibility for LAN devices.

• IR Anywhere modules can be used as routable IP network based inputs

• Built in wideband IR receiver - May be disabled if required.

• Local inputs are “one way IRDA” compatible - Will route signals to control all popular set top boxes.

• Will act as Dynamic DNS update client - Built in support for non-static WAN IP addresses.

ALL Keene IR receivers are designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.

The IR Commander Matrix is available now, retail price starts from £169.99 inc VAT

www.keene.co.uk/ircommander