CYP has announced the arrival of its AU-A300-HBT HDBaseT 2-Channel Digital AV Receiver, which is now in stock. The perfect product to pro...
CYP has announced the arrival of its AU-A300-HBT HDBaseT 2-Channel Digital AV Receiver, which is now in stock. The perfect product to provide high quality audio distribution, amplification, and AV signal management to remote AV zones within any multi-room installation. This advanced solution can integrate local HDMI and remote HDBaseT sources from a CYP matrix, local inputs (iPod and MP3, etc.) via the stereo and digital inputs, and even utilise the audio output from a TV, which is growing in popularity as a dedicated audio source within an AV system
The AU-300-HBT also incorporates an HDBaseT output, which can be used for creating additional HDBaseT zones or used to repeat the signal to further HDBaseT 2-Channel Digital AV Receivers up to 100m over Cat-6.
Specifications include:
- 30W per channel digital stereo Amplifier
- Integrated HDBaseT Input and Output
- Control via remote control, RS-232 or IP (Web GUI or Telnet)
- Simultaneous audio outputs
- HDMI Audio Embedding
- Supports Digital to Analogue (DAC) and Analogue to Digital (ADC) conversion
- Compact design for remote in-zone application
- Supports PoC (Power over Cable) for connected compatible HDBaseT receivers
Inputs:
- 1x HDMI (1x HDMI Uncompressed AV and Data)
- 1x RJ45 (1x HDBaseT HDMI & Propriety Data)
- 1x RCA (1x Coaxial 2 Channel LPCM)
- 1x Toslink (1x Optical 2 Channel LPCM)
- 2x RCA (1x Analogue Stereo (L/R))1x 3.5mm Stereo mini-jack (1x Analogue Stereo(L/R))
- 1x 3.5mm Stereo mini-jack (1x Infra Red Receiver)
- 1x 9pin Dsub (1x RS-232 Data)
- 1x RJ45 (1x IP Control)
- 1x RJ45 (1x Keypad - reversed for future use - Propriety Data)
- 1x USB Type A (1x Service Port Propriety Data)
Outputs:
- 4x Speaker Binding Posts (1x Speaker Level Stereo Output)
- 1x HDMI (1x HDMI Uncompressed AV and Data)
- 1x RJ45 (1x HDBaseT HDMI & Propriety Data)
For advice and support call :+44 (0) 20 3137 9180
www.cypeurope.com