Invision UK has announced the availability of the new Origin Acoustics ThinFit Loudspeakers. The ThinFit Collection has been designed sp...
Invision UK has announced the availability of the new Origin Acoustics ThinFit Loudspeakers. The ThinFit Collection has been designed specifically for installations with limited depth requirements, with all three models featuring an integrated back-can with a mere 70mm depth.
“We saw this collection as a necessity,†says Jeremy Burkhardt, Origin’s CEO. “The construction methods in MDU’s and some geographic areas demand a very thin profile. The idea was to limit depth without limiting performance. The ThinFit Collection delivers on both counts.â€
[caption id="attachment_9735" align="alignleft" width="353"]
Origin Acoustics' TF34[/caption]
The ThinFit collection comprises of three models the TF34, TF36 and TF64DT. The TF34 and TF36 share a similar driver configuration. Dual 88mm woofers and dual 88mm midwoofers surround a 20mm tweeter. The TF34 feature Injection Molded Graphite (IMG) woofers and midwoofers with an aluminum tweeter. The TF36 steps up to Glass Fiber woofers and a silk-dome tweeter. Both are mounted on an injection-molded baffle that integrates into the steel back-can creating a ported enclosure.
The TF64DT features a 17cm dual voice-coil, IMG woofer and two 20mm aluminum tweeters. These are also mounted on an injection-molded baffle, which attaches to a steel back-can creating a sealed enclosure. The dual-tweeter design allows both left and right channels to be produced from a single speaker. All three models use the same bezeless magnetic grille assembly found on the Director D80 series.
The acoustic dampening enclosures are fully integrated with the woofers to create a superior sonic result. The enclosures also cut down on room-to-room sound transfer by up to 9dB.
www.invisionuk.com
www.originacoustics.com